Pineapple Grove Designs SculptMetal™ Products

Metalized & Chroma LEED Product Data

U.S. Green Building Council LEED Certification

USGBC Medallion in metalized Antique Nickel


LEED certification provides independent, third-party verification that a building project meets the highest green building and performance measures. SculptMetal™ Architectural Ornaments and Signage meet LEED performance criteria and in aggregate with other materials and systems can qualify towards LEED certification from the U.S. Green Building Council.

Pineapple Grove Designs is committed to environmental stewardship and social responsibility. We strive to conserve non-sustainable resources, minimize energy consumption and greenhouse gas emissions, eliminate waste whenever possible, provide a safe and nurturing work environment for our employees. A parallel goal is to provide the most efficient and helpful service to our specifying customers and contractors and make the most beautiful, inspiring and most durable architectural elements possible.

Download: PDF 136kbLEED DATA SHEET

How Metalized & Chroma finishes
Earns Your Project LEED Points


Pineapple Grove Designs is dedicated to producing and delivering the highest quality, most exciting Architectural Ornaments and Details. As well, we are always searching for new ways to make our products better & more earth friendly.

We have recently completed a material reformulation and revamped our production processes to better meet the recommendations advocated by U.S. Green Building Council. New SculptMetal™ meets high aesthetic and ASTM standards and reflects our commitment to the environment.

Information about SculptMetal™ material is included herein to help you complete LEED™ Data Sheets for the purpose of qualifying towards LEED™ certification.

MR Credit 4 -Recycled Content: SculptMetal™ contains 50% post-consumer recycled content and can help contribute to earning MR Credit 4.
Components: 100% post-consumer aluminum, 20%; 100% post-consumer frit, 22%; 100% post-consumer lignum, 5%.

MR Credit 5.1 and 5.2 -Regional Materials: SculptMetal™ is manufactured in Boynton Beach, FL 33426 with locally extracted materials. If your project falls within a 500 mile radius of this location, products are considered to be locally manufactured and can help contribute to earning MR Credits 5.1and 5.2.

MR Credit 6 -Rapidly Renewable Materials: SculptMetal™ contains 100% rapidly renewable materials and can help contribute to earning MR Credit 6.
Component: Composite aggregate, 100%.

EQ Credit 4.1 and 4.2 -Low Emitting Materials: All sealers and coatings used in
SculptMetal™ meet VOC limits of Green Seal Standards GS-11 and can help contribute to earning EQ Credits 4.1 and 4.2.

We are proud to be a member of the U.S. Green Building Council. Under their guidance we have also achieved:

  • No harmful emissions during fabrication or after installation.
  • No CO2 release during fabrication-low carbon footprint.
  • Low energy consumption for fabrication.
  • Higher strength products requiring less packaging protection materials.
  • Items are fabricated on demand-no excess inventory to maintain or spoil, minimizes waste.
  • Items are shipped directly from manufacturer to job site, additionally reducing environmental costs.
  • Quality, long lasting material has long product life cycle eliminating excessive costs of replacement.


Please call 800-771-4595 if you need more information about our products.